All Products

Oil-field specific high pressure electromagnetic flowmeter
paper-making specific electromagnetic flowmeter
MGG type Smart Electromagnetic flowmeter
MGG Wafer Electromagnetic flowmeter
MGG Insertion type Electromagnetic flowmeter
MGG Battery-Powered Electromagnetic Flowmeter
MGG Sanitary Centrifugal type Electromagnetic flowmeter
MGG high pressure Electromagnetic flowmeter
MGG Diving type Electromagnetic flowmeter
Portable type Ultrasonic flowmeter
Hand-held Ultrasonic flowmeter
Fixed and simple type Ultrasonic flowmeter
Fixed standard type Ultrasonic floemeter
Remote type Ultrasonic flowmeter
MGG/R Electromagnetic type Heat-energy meter
LUGB type vortex flowmeter
WLV V-cone type Flowmeter
WLG orifice-plate flowmeter
Homeproducts >> Fixed standard type Ultrasonic floemeter

Fixed standard type Ultrasonic floemeter一、Overview:
  It is a integral pipe section type ultrasonic flowmeter that use of low-power single-chip control to research and develop .It Solve the problem caused by which external application and plug-in sensor in the installation process, as a result of man-made or channels measured parameters were not correct so that caused by error ,then to decline measurement accuracy .It have more advantages such as high accuracy , wide-range, low cost, simple installation, low pressure loss and no mechanical moving parts ,etc .

·Accuracy :Better than 1%
·Repeatability :Better than 0.2%
·Linearity :Better than 0.5%
·Measuring range : Different specifications of the sensor placement can be realized caliberating the flow measurement DN50 ~ DN6000 pipeline.
·Working power :24VDC
·Installation mode :clamp type ,insertion type ,pipe section type
·Display : Primary measuring instrument can finish the measurement at measuring points, it can also re-display the cumulative flow, transient flow, flow and other parameters, the secondary instrument shows that more than 100 Chinese Menu.
·Operation : Magnetic rod can be used in viewing parameters in primary measuring instrument, but also through the secondary instrument with the Chinese again set parameters or display.
·Protection Class :Primary measuring instrument could reach to IP68 ,and working under 2 meters of underwater.
·Others :It adopt RS485 communication between primary and secondary measuring instrument ,using normal cable , transmission distance is up to 1000 meters above, network is very convenient and fast. This transmission mode has high anti-interference ability ,can resolve the issues such as specific cable of remote type Ultrasonic Flowmeter is high cost , weak anti-jamming capability, transmission distance short ,etc .

二、Optional host of secondary measuring instrument

Wall hanging type
Dashboard mount type
Ex-proof
·Used for installing on the wall
·Dimension:178×165×55mm
·Used for installing dashboard
·Dimension:84×168mm
·Ex-proof class :DIIBT4O
  ccasions for the
  explosion-proof
·Dimension :285×265×90mm

三、Optional sensor

Simple type

Features
Clamp

·Installation directly ,no need to stop the flow, no pressure   loss
·Accuracy is ±1%
·Installation and maintenance is convenient, users can install   by themselves.
·Price is the lowest ,no relate to the caliber
·For the environment of better working conditions

Insertion
·Installation directly ,no need to stop the flow, no pressure loss
·Accuracy is ±1%
·After training , users can install by tapper themselves.
·Price is the highest ,no relate to the caliber
·Receive a good signal, long-term operation is stable and reliable
Pipe section
·Installation need to stop the tube and flow ,no pressure less
·Accuracy is ±0.5%
·Installation need to stop the flow , users can install by tapper theirselves.
·The size is larger ,the price is higher.
·High accuracy ,receive a good signal, long-term operation is stable and reliable

四、Optional accessories

Sensor
Specification
Measuring range
Fluid temperature
Accuracy
Clamp
Standard
DN50-DN1000
-30℃~90℃
±1%
Large
DN300-DN6000
High temperature clamp
standard
DN300-DN1000
-30℃~160℃
Insertion
Standard
DN80-DN6000
-40℃~160℃
Pipe section
standard
DN50-DN1000
-40℃~160℃
±0.5%
Power

Primary measuring instrument is DC8~36V ,secondary instrument is AC220V or DC24V

Input

3 Road, 4 ~ 20mA analog input, 2-way 3-wire system TP-100 resistance signal input

Output

Isolated RS232/RS485 output, 2-way Isolated OCT output, 1 way isolated 4 ~ 20mA output (passive)

Communication protocol

METER-BUS protocol、MODBUS protocol 、Fuji extended protocol

KaiFeng WeiLi Flow Instrument CO.,LTD
KaiFeng WeiLi Copyright @ 2000-2009 All rights reserved
ADD:No.6 Northern lndustrial Zone KaiFeng Henan,P.R.China TEL:83-0378-2945298 E-mail:kfweili@gmail.com